Product Features
Types Available: LC, SC, FC, ST, MPO/MTP, E2000, MU, MTRJ, and Hybrid types.
Optical Performance: Low insertion loss and high return loss guarantee superior signal integrity.
Fiber Mode Options: Available in Single-Mode (SM) and MultiMode (MM).
End-Face Polish Types: PC, APC, and UPC end-face configurations available.
Channel Configuration: Simplex and Duplex structures supported.
Durability Rating: High mechanical durability ≥ 1000 mating cycles.
Product Features
Connector Types: SC/UPC and SC/APC connector types available.
Pre-Embedded Fiber Technology: Pre-embedded optical fiber within ceramic ferrule,
requiring no epoxy curing or field polishing.
Fiber Mode Options: Available in Single-Mode (SM) and MultiMode (MM).
Cable Compatibility: Suitable for 3x2.0mm drop cables or 3.0/2.0/0.9mm round cables.
Durability Rating: High mechanical durability ≥ 1000 re-mating cycles.
Field Assembly: Fast, cold-connection assembly designed for FTTH field installations.
| Parameter | Specification |
|---|---|
| Fiber Optical Adapter — available models | LC, SC, FC, ST, MPO/MTP, E2000, MU, MTRJ, hybrid |
| Fiber Optical Adapter — fiber modes | Single-mode (SM) / multimode (MM) |
| Fiber Optical Adapter — polish types | PC, UPC, APC |
| Fiber Optical Adapter — insertion loss | ≤ 0.2 dB |
| Fiber Optical Adapter — durability | ≥ 1000 mating cycles |
| Quick Connector — models | SC/UPC, SC/APC |
| Quick Connector — cable compatibility | 3 × 2.0 mm drop cable; 3.0 / 2.0 / 0.9 mm round cable |
| Quick Connector — construction | Pre-embedded fibre in ceramic ferrule, no epoxy curing or field polishing |
| Quick Connector — insertion loss | ≤ 0.3 dB |
| Quick Connector — durability | ≥ 1000 re-mating cycles |
Values are typical reference data taken from the official Huifiber datasheet. Confirm the final specification against the datasheet before ordering.
Wholesale high-quality fiber optic adapters and field assembly fast connectors from Huifiber. Low insertion loss, easy installation for FTTH networks.
Yes. Huifiber supplies cable under the buyer's own brand as well as under the Huifiber brand. Fibre count, jacket material, jacket print, drum marking, drum length, packaging and datasheet layout can all be produced to the customer's requirement, and the engineering team can work from a customer specification or adapt an existing construction to a new route requirement.
Every production batch is tested before it leaves the plant in Dongguan. Attenuation and geometry are measured on OTDR and optical bench equipment, and mechanical performance is verified against the datasheet for the construction. A factory test report is issued with each shipment, so an incoming inspection can be checked against the same numbers.
Send the fibre count and fibre type, the jacket material or fire rating, the route length or span and the drum length you need, the destination port or country, and any certification or test-report requirement. With those details the sales engineer can confirm the construction and return a quotation with an indicative lead time.
