Product Description
The GDXH-2B6+2*0.75mm² Optical-Electric Composite Drop Cable features a bow-type
structure where an outer low-friction sheath is extruded over the fiber cores.
It is embedded with two single strands of 0.75mm² oxygen-free copper cores as
strength members and power transmission conductors. Integrating optical fiber
and copper wire into a single cable, it effectively solves broadband access,
terminal device powering, and signal transmission requirements simultaneously.
Outdoor models can be fitted with an additional self-supporting messenger wire
on the side as a strength member.
Product Features
Hybrid Fiber-Power Integration Combines optical fibers and power lines within a single cable
to deliver simultaneous high-speed data transmission and remote power supply.
High Electrical Insulation & Zero Interference Features superior insulation performance,
ensuring optical data transmission and electrical power transmission operate seamlessly
without mutual interference.
One-Time Deployment & Cost Reduction Enables single-step installation for both data and power,
significantly shortening construction periods and reducing overall installation costs.
UV Protection & Weather Resistance Outer sheath material offers excellent UV resistance
under direct sunlight and high insulation properties for long outdoor service life.
Customizable Copper Wire Conductor Copper wire cross-sectional areas can be fully
customized according to specific client power requirements.
Compact, Lightweight & Easy Laying Small outer diameter and lightweight construction
allow for easy routing, bending, and hassle-free installation in tight spaces.
| Cable Model | Fiber Count | Cable Dimension (mm) | Cable Weight (kg/km) | Allowable Tensile Force (N) — Long-Term | Allowable Tensile Force (N) — Short-Term | Allowable Crush Resistance (N/100mm) — Long-Term | Allowable Crush Resistance (N/100mm) — Short-Term | Bending Radius (mm) — Static | Bending Radius (mm) — Dynamic |
|---|---|---|---|---|---|---|---|---|---|
| GDXH-2B6+2*0.5mm² | 2 | 2.2 × 5.3 | 15 | 400 | 800 | 300 | 1000 | 10D | 20D |
| GDXH-2B6+2*0.75mm² | 2 | 2.2 × 5.3 | 20 | 400 | 800 | 300 | 1000 | 10D | 20D |
| GDXH-2B6+2*1.0mm² | 2 | 2.2 × 5.3 | 25 | 400 | 800 | 300 | 1000 | 10D | 20D |
| GDXH-2B6+2*1.5mm² | 2 | 2.5 × 6.0 | 35 | 400 | 800 | 300 | 1000 | 10D | 20D |
| GDXH-2B6+2*2.5mm² | 2 | 3.0 × 7.0 | 60 | 400 | 800 | 300 | 1000 | 10D | 20D |
Values are typical reference data taken from the official Huifiber datasheet. Confirm the final specification against the datasheet before ordering.
GDXH-2B6 hybrid FTTH drop cable combines 2-core G.657.A2/B6 fiber with 2x0.75mm2 copper power conductors in one jacket, enabling remote power feeding.
Yes. Huifiber supplies cable under the buyer's own brand as well as under the Huifiber brand. Fibre count, jacket material, jacket print, drum marking, drum length, packaging and datasheet layout can all be produced to the customer's requirement, and the engineering team can work from a customer specification or adapt an existing construction to a new route requirement.
Every production batch is tested before it leaves the plant in Dongguan. Attenuation and geometry are measured on OTDR and optical bench equipment, and mechanical performance is verified against the datasheet for the construction. A factory test report is issued with each shipment, so an incoming inspection can be checked against the same numbers.
Send the fibre count and fibre type, the jacket material or fire rating, the route length or span and the drum length you need, the destination port or country, and any certification or test-report requirement. With those details the sales engineer can confirm the construction and return a quotation with an indicative lead time.
