You Might Be Looking For...
Products

GYTA / GYTS

GYTA / GYTS - Product Range

GYTA / GYTS / GYXTW and PSP armoured stranded cable from Huifiber: loose tube outdoor fiber optic cable with steel tape or wire armor, 0.36 dB/km at 1310 nm.

Frequently Asked Questions

GYTA and GYTS are the two workhorse loose-tube outdoor cables for duct and aerial routes. The difference is the metallic moisture barrier inside the jacket.

What is the difference between GYTA and GYTS cable?

GYTA uses a corrugated aluminium tape (APL) moisture barrier, which makes it lighter and well suited to duct installation. GYTS uses a corrugated steel tape (PSP) that adds mechanical and rodent protection at the cost of some extra weight.

What is the attenuation of GYTA cable?

With standard G652D fiber the attenuation is typically no more than 0.36 dB/km at 1310 nm and 0.22 dB/km at 1550 nm. The exact figure for your order is stated on the test report supplied with each drum.

Which one should I choose for duct installation?

GYTA is normally the better fit for duct routes because it is lighter and easier to pull. Choose GYTS when there is a meaningful rodent risk or where additional crush resistance is needed.

Do you offer armored versions for direct burial?

Yes. GYTA53 and GYTS53 add a double armour layer and are intended for direct burial where the cable must resist soil pressure and rodent attack without a duct.

What fiber counts are available?

Both constructions are produced in fiber counts from 2 up to 288 cores, using G652D or G657 single mode fiber in gel-filled or dry water-blocked loose tubes.

Still have a question? Send us your specification and our engineers will reply with a recommendation and a quotation.