Product Features:
Standard enclosure made of high-density, corrosion-resistant, and aging-resistant materials, providing reliable sealing, waterproofing, and moisture resistance for use in various harsh weather conditions.
Integrated fiber splicing and distribution module with adapter mounting, splicing, and fiber storage functions. The adapters feature a snap-in design and are compatible with various adapter types, including FC, SC, and ST. The adapter mounting positions are angled downward at 30° to ensure the proper bending radius of pigtails.
Equipped with a spare fiber splice tray at the bottom, allowing direct splicing of trunk cables and distribution cables.
The enclosure surface can withstand a vertical pressure of more than 980 N. When the door is open, the outermost edge of the door can withstand a vertical pressure of more than 200 N.
| Parameter | Specification |
|---|---|
| Enclosure Material | High-density, corrosion- and ageing-resistant |
| Adapter Types | FC, SC, ST (snap-in) |
| Adapter Mounting Angle | 30° downward (bend-radius protection) |
| Enclosure Vertical Pressure | > 980 N |
| Door Edge Pressure (open) | > 200 N |
| Splice Tray | Integrated tray plus spare tray at the bottom |
Values are typical reference data taken from the official Huifiber datasheet. Confirm the final specification against the datasheet before ordering.
High-density outdoor fiber cross connect cabinet for backbone and distribution cables. Weatherproof enclosure, integrated splice and adapter modules.
Yes. Huifiber supplies cable under the buyer's own brand as well as under the Huifiber brand. Fibre count, jacket material, jacket print, drum marking, drum length, packaging and datasheet layout can all be produced to the customer's requirement, and the engineering team can work from a customer specification or adapt an existing construction to a new route requirement.
Every production batch is tested before it leaves the plant in Dongguan. Attenuation and geometry are measured on OTDR and optical bench equipment, and mechanical performance is verified against the datasheet for the construction. A factory test report is issued with each shipment, so an incoming inspection can be checked against the same numbers.
Send the fibre count and fibre type, the jacket material or fire rating, the route length or span and the drum length you need, the destination port or country, and any certification or test-report requirement. With those details the sales engineer can confirm the construction and return a quotation with an indicative lead time.
