Key Features & Specifications
Modular Plug-and-Play Design: Features quick-release fasteners and front-panel adapters
for quick slide-in installation and effortless maintenance.
Space-Saving & High Density: Compact cassette footprint allows multiple modules
to be loaded into standard optical distribution boxes or ODF units.
Low Insertion Loss & Low PDL: Advanced optical chip architecture ensures minimal
signal attenuation and uniform optical power split ratios (e.g., 1x4, 1x8, 1x16, 1x32).
Robust Port Protection: Internal pigtails and optical chips are fully shielded inside the
enclosed housing, preventing dust contamination and physical bend damage.
Wide Operating Wavelength Range: Fully compatible with GPON, EPON, and XGS-PON
operational wavelengths (1260nm to 1650nm).
High Reliability & Stability: Tested to meet Telcordia GR-1209-CORE and GR-1221-CORE
standards for superior environmental and mechanical stability.
Applications
FTTH / FTTx Networks: Mounted inside Fiber Distribution Boxes (FDB), Fiber Access
Terminals (FAT), and outdoor cabinet enclosures for last-mile subscriber connections.
Passive Optical Networks (PON): Critical component for central office to end-user
optical power splitting in EPON, GPON, and 10G-PON systems.
ODF & Optical Cross-Connect Cabinets: Ideal for high-density modular patch panels
where scalable expansion and neat cable management are required.
CATV & Telecom Distribution Networks: High-reliability optical splitting for
multi-dwelling unit (MDU) broadband signal distribution.
| Parameter | Specification |
|---|---|
| Splitting Technology | Planar Lightwave Circuit (PLC) |
| Available Split Ratios | 1×4, 1×8, 1×16, 1×32 |
| Operating Wavelength | 1260–1650 nm |
| Polarization Dependent Loss | Low PDL |
| Mounting | Cassette / insertion module with front-panel adapters |
| Compliance | GR-1209-CORE and GR-1221-CORE (Telcordia) |
Values are typical reference data taken from the official Huifiber datasheet. Confirm the final specification against the datasheet before ordering.
The Insert / Cassette Type PLC (Planar Lightwave Circuit) Splitter is a highly integrated optical power management device designed for seamless plug-and-pl
Yes. Huifiber supplies cable under the buyer's own brand as well as under the Huifiber brand. Fibre count, jacket material, jacket print, drum marking, drum length, packaging and datasheet layout can all be produced to the customer's requirement, and the engineering team can work from a customer specification or adapt an existing construction to a new route requirement.
Every production batch is tested before it leaves the plant in Dongguan. Attenuation and geometry are measured on OTDR and optical bench equipment, and mechanical performance is verified against the datasheet for the construction. A factory test report is issued with each shipment, so an incoming inspection can be checked against the same numbers.
Send the fibre count and fibre type, the jacket material or fire rating, the route length or span and the drum length you need, the destination port or country, and any certification or test-report requirement. With those details the sales engineer can confirm the construction and return a quotation with an indicative lead time.
