Product Description
The 5G Photoelectric Composite Cable (GDVV) is a hybrid cable that integrates optical fiber
units into a low-voltage power cable structure, combining both electric power transmission and
optical communication capabilities. It is suitable for rated voltage levels of 450/750V AC and below.
The GDVV 2G.G657A2 (Bow-type) + 2×1.5 mm² model contains two 1.5 mm² insulated electrical conductors and
two single-core bow-type drop optical units (each optical unit contains 1 optical fiber core).
Product Features
Compact Profile & Conduit Optimization Small outer diameter and lightweight build reduce overall bulk, conserving
space and saving valuable duct/conduit resources.
G.657 Bend-Insensitive Fiber Utilizes G.657 bend-insensitive optical fiber to deliver high-speed, ultra-stable
data transmission even under tight bend radii.
Cost Reduction & CAPEX Efficiency Eliminates secondary cabling runs, lowering procurement costs and significantly
reducing overall installation labor expenses.
Controlled Excess Fiber Length Precisely controlled fiber excess length ensures excellent tensile resistance and
superior thermal stability across varied environments.
Broadband Access & Remote Powering Provides integrated high-speed broadband connection alongside reliable power
supply for active network equipment.
ntegrated Solution for FTTH & 5G Terminals Solves simultaneous communication and power feed requirements for
FTTH setups and mobile communication network terminals.
| Cable Model | Cable Cores | Cable Weight (kg/km) | Operating Temperature Range (°C) — Power Line | Operating Temperature Range (°C) — Other Components | Allowable Tensile Force (N) — Long-Term | Allowable Tensile Force (N) — Short-Term | Allowable Crush Resistance (N/100mm) — Long-Term | Allowable Crush Resistance (N/100mm) — Short-Term | Bending Radius (mm) — Static | Bending Radius (mm) — Dynamic |
|---|---|---|---|---|---|---|---|---|---|---|
| CB2 x GJXH + 2 x 1.5mm² | 4 | 115 | -15°C ~ +70°C | -40°C ~ +70°C | 200 | 660 | 300 | 1000 | 10D | 20D |
| CB2 x GJXH + 2 x 1.5mm² | 4 | 145 | -15°C ~ +70°C | -40°C ~ +70°C | 200 | 660 | 300 | 1000 | 10D | 20D |
Standards & compliance: YD/T 2289.3
Values are typical reference data taken from the official Huifiber datasheet. Confirm the final specification against the datasheet before ordering.
Huifiber GDVV 5G hybrid fiber-power cable combines optical fiber and low-voltage power conductors (450/750V) for simultaneous high-speed data transmission.
Yes. Huifiber supplies cable under the buyer's own brand as well as under the Huifiber brand. Fibre count, jacket material, jacket print, drum marking, drum length, packaging and datasheet layout can all be produced to the customer's requirement, and the engineering team can work from a customer specification or adapt an existing construction to a new route requirement.
Every production batch is tested before it leaves the plant in Dongguan. Attenuation and geometry are measured on OTDR and optical bench equipment, and mechanical performance is verified against the datasheet for the construction. A factory test report is issued with each shipment, so an incoming inspection can be checked against the same numbers.
Send the fibre count and fibre type, the jacket material or fire rating, the route length or span and the drum length you need, the destination port or country, and any certification or test-report requirement. With those details the sales engineer can confirm the construction and return a quotation with an indicative lead time.
